Dissmann Fuse IEC & British Standard Fuses - BS 88 low voltage fuses DC150V Fuse Made in China

Dissmann British standard fuses can be used in multiple applications. Full range of rated current, voltage available as well as compatible fuse holders. They meet the BS88 and IEC 60269 standards.

240VAC/150VDC (6A-900A) BS88-HBD series fuse Model shows as below:

Different models corresponding size chart of the BS88-HBD series fuse:

LEP/LET LMP/LMT

Time-current curve of the DC150V BS88-HBD series fuse:

LEP/LET LMP/LMT

Normal use conditions and parameter correction:

• The fuse works under the following normal use conditions and does not require additional corrections.
• When the normal use conditions are exceeded, if it is within the allowable use conditions, some parameters may need to be corrected or consulted.
• If it exceeds the scope of the allowable use conditions, you should consult our company, and carry out the work suitability assessment and test of the conditions.
• It is recommended that the current value of long-term flow should not exceed 80% of the rated current.
• For over-temperature use, please refer to the temperature evaluation curve. ambient air temperature Normal use conditions: -5°C~40°C. Allowable operating conditions: -40°C~85°C.